Double Glazed Window Repair

It's worth checking the warranty that comes with double-glazed windows in the majority of cases. It usually covers issues with window hardware, including hinges and locking mechanisms within the first 10 years.

A leak in the seal is usually the reason for mist appearing between your glass windows. This needs to be addressed immediately to prevent damp or mould growing in your home.

Condensation Between the Windows

If condensation forms between windows in your home, it's an indication that the seal securing the gas that is used to insulate between the panes has failed. This is a serious issue that needs to be addressed immediately, especially during winter, when humidity levels are at their highest. This could also cause damage to sills or sealants and also cause mould.

Double-glazed windows shouldn't have condensation between the panes. However, it's not unusual for high humidity or an extremely cold snap to trigger this problem. Fortunately, it is fixable without replacing the entire window. A professional can drill small holes in the glass and then spray the inside of the window with a special cleaning solution. The moisture is then removed from the window, and an anti-fogger device may be installed to stop further moisture buildup in the future.

Condensation in the windows could be due to air leakage, or other factors outside the window. In this instance it can take a longer time for the condensation in the window to build up, since the air must be warm enough to vaporise the water molecules. In these cases it is more beneficial to replace double-glazed windows instead of to try to repair the sealed units.

A double-glazed glass window composed of two or more pieces of tempered, insulated glass that are held together by a framework made of metal. The gap in the middle of the window is filled with a non-toxic gas for insulation like argon or Krypton and then sealed tightly. The seal is responsible for preventing the gas that is insulating from escape and also prevents air and moisture from getting through the gap.

As windows age, the seals weaken and allow moisture to enter the gap between the glass panes. It is important to know when the seals are leaking, as it means that the double glazing is no longer performing as well as it did in the past. This can result in poor energy efficiency, higher heating costs, a damaged properties and the risk of condensation between the windows.

Mist

It is normal to see condensation appear on your windows. This indicates that your double glazing system is functioning correctly and is able to maintain warm in your home. The condensation happens because the air outside is warmer than the glass, and it reaches the dew point of the window before the air inside. Double glazing of high quality is a fantastic way to get this.

If the condensation is on the inside of your window, this can be a sign of a problem with the ventilation in your home. The excess moisture can't go anywhere else and ends in the carpets, windows furniture, and other areas of your home. Getting this checked out by a professional and making sure that there is plenty of fresh air moving through the home will help prevent it from happening again.

Another reason why mist appears on double-glazed windows is because the seal between two glass panes is broken. This can be caused by wear and tear, or due to the use of chemical cleaning solutions. If this happens the best solution is to have the windows repaired in the shortest time possible.

Professionally repairing your windows will ensure that they are fog-free, free of condensation and free of misting. This is also much cheaper than replacing your windows and you'll save money on your energy bill.

A FENSA certified window installer can provide you with a cost estimate for the repair or replacement of your double glazed windows. If your windows are old and have been in use for a long time, you may want to think about upgrading them to new A-rated energy efficient ones.

It is a great idea to keep copies of any warranties and agreements with your window fitters. This will be very helpful if any problems with the windows occur in the future, and you can then contact your installers to resolve these issues. This is a better option than ignoring the issue and causing more problems for your home.

Difficulty to Open or Close

It's not just annoying when double-glazed windows are hard to open or close. They can also result in higher energy bills because of heat loss and draughts. It could also be security risk, particularly when the locks aren't functioning properly. It is essential to fix any issues with double glazed windows and doors immediately you spot them.

If you're unable to open your windows and have tried the simplest solution such as using a screwdriver to prise it open or tapping around the frame with a hard object, then the problem could be more serious. The window may have shifted and requires a reset or there could be a gap between glass and frames. In either case, you should call in a professional double glazing repair expert to ensure that the correct repairs are made to prevent future problems.

It's not uncommon to find UPVC window handles and lock mechanisms to become difficult to operate or get stuck particularly if they're old and worn. It is usually caused by the accumulation of grease or dirt in the handle. This is easily fixed by cleaning it with a uPVC cleanser. If this doesn't work then you can try gently tapping the uPVC frame using a hard object, such as a screwdriver, taking care not to scratch the handle or the window handle mechanism.

If this does not solve the problem, the window will need to be replaced because the hinges may not be in the proper place or the locking mechanism could have been damaged. In this situation, contact a specialist UPVC window repair expert.

David The Window Wizard is a specialist in double-glazed door and window repairs, which includes repairing double-glazed windows that have been blocked or locked. He has a lot of experience in converting old window mechanisms into modern ones. This can save you money on replacing the entire window. Contact us now for more information or a free estimate.

Warping

Double-glazed windows are usually an excellent option to save energy in the home. They are made up of two distinct panes that have a spacer, gas or air between the panes, creating a seal to keep cold air out and warm air in. In time, however, these windows may become damaged or break and require repair upvc window. Fortunately, the majority of these repairs are simple and can be done without the expense of replacing the entire window.

Warping is a common problem when double-glazed windows are installed. The windows begin to flex or twist, or upvc Window repair bow. This can affect the structural integrity and insulating abilities of the window. Double glazed windows should be installed correctly and maintained regularly to avoid this problem.

Get in touch with a professional immediately if you notice that your double-glazed windows are sagging. This will help stop the problem from becoming worse. They will be able to inspect your windows and determine the root cause of the warping. They will then utilize special tools to correct the issue and ensure that your windows are completely sealed.

The most common cause of this issue is water vapour in the windows which can build up over time. This could be due to various factors, including the weather such as humidity levels, temperature and variations. To fix this problem the expert will drill a tiny hole to let the moisture out. The specialist will use a cleaner on the glass to clean it and then apply sealant.

If your windows cannot be opened or shut it could be due to a damaged mechanism or hinges. It is recommended to lubricate these parts of the window before calling in a professional, as this can often solve the issue and decrease the necessity for replacements. If your windows are dated or don't offer the insulation you desire it might be better to replace them.