Double Glazed Window Repair

It's worth checking the warranty that comes with the majority of double-glazed windows. It usually covers issues with window hardware, such as hinges and locking mechanisms within the first ten years.

A leak in the seal is typically the cause of mist between your glass windows. This should be fixed immediately to avoid mold or damp growing in your home.

Condensation Between the Windows

If condensation forms between the windows in your home, it is an indication that the seal securing the gas that is used to insulate between the panes has failed. This is a serious problem that should be addressed immediately, especially during the winter months when humidity levels are at their highest. It could also cause damage to sills, sealant and mould.

Double-glazed windows should not have condensation between the panes. However, it is not common for high humidity or an extremely cold snap to cause this problem. This issue is usually resolved without the need to replace an entire window. A professional can drill small holes into the glass and then spray the inside of the window with a special cleaning solution. The moisture is then sucked out of the window, and an anti-fogger device can be added to prevent further accumulation of moisture in the future.

Condensation between windows can be due to air leakage or other causes outside the window. In this scenario it can take a longer time for moisture in the window to build up, because the air must be warm enough to evaporate the water molecules. In these cases it is more beneficial to replace double-glazed windows than attempt to repair the sealed units.

A double-glazed glass window comprised of two or more pieces of tempered, insulated glass, which are joined by a metal frame. The space between the windows is filled with an insulating gas such as Krypton or argon and then sealed. The seal is responsible for stopping the gas used to insulate from escaping, and it also stops air and moisture from getting through the gap.

As windows age, seals deteriorate allowing moisture to leak between the glass panes. It is important to know when the seals are leaking and this means that the double glazing isn't performing as well as it used to. This could lead to poor energy efficiency, increased heating bills, damaged properties and the risk of condensation between the windows.

Mist

If you notice condensation on the outside of your windows, this is perfectly normal and means that your double glazing is in good working order and retaining the heat in your home. The condensation forms because the air outside is warmer than the glass and it reaches its dew point before the window does. This is one of the great advantages of having high quality double glazing.

If you notice condensation on the inside of your window, this could indicate a ventilation issue in your home. The excess moisture won't go anywhere else and ends in the carpets, windows, furniture, and other parts of your home. The process of having this examined by an expert and ensuring that there is plenty of fresh air moving through the home will help avoid it from happening again.

Another reason for mist on double-glazed windows is that the seal between two glass panes has broken. This could be due to wear and tear, or by using chemical cleaning solutions. The best thing to do is get the windows repaired in the shortest time possible.

A professional repair of your windows will ensure they remain fog-free, free of condensation and free of misting. It's also cheaper than replacing them completely and will reduce your energy bills.

A FENSA registered window installer can offer a price for the repair upvc window or replacement of your double-glazed windows. If your windows are old and have been in use for a while you might want to consider upgrading them to new A-rated energy efficient windows.

It is a good idea to keep copies of any warranties or agreements with your window fitting company. This will be very useful if any problems with the windows occur in the future, and you then contact your fitters to resolve the issue. This is a much better option than simply ignoring the problems, which will only get worse and could cause other issues in your home.

Open or close with difficulty

When double glazed windows become difficult to open and close it's not just a nuisance and can result in increased energy bills due to heat loss and draughts. It could also be a security issue especially if the locks aren't working correctly. It is crucial to address any issues with double-glazed windows and doors when you spot them.

If you can't open your windows and have tried the most basic of solutions like using a screwdriver to prise it open or tapping around the frame with a tough object, then the issue may be more serious. The window may have moved and requires a reset or there may be a gap between the glass and frames. In either case, seek out a double glazing repair specialist to ensure the repairs are done correctly and to prevent further problems.

It's not unusual to find UPVC window handle and lock mechanisms to become difficult to operate or become stuck particularly if they're old and worn. It is usually caused by the accumulation of grease or dirt in the handle. This is easily fixed by cleaning it with a uPVC cleanser. If this doesn't help, you could try gently tapping the upvc window repair near me frame with a hard object like a screwdriver, taking care not to scratch the handle or the window handle mechanism.

If this does not resolve the problem then the window may have to be replaced, as it is likely that the hinges aren't longer in the correct position, or the locking mechanisms are damaged. In this case you should contact a specialist UPVC window repair expert.

David The Window Wizard is a specialist in double-glazed window and door repairs, which includes repairing windows that are double-glazed and have jammed or been locked shut. He has vast experience the conversion of old window mechanisms into modern ones and will often reduce the expense of replacing the entire window. For more information or to book an appointment for a free quote, contact us by phone or email us today.

Warping

Double-glazed windows are an excellent way to save energy in your home. They consist of two separate panes with a spacer, air or dense gas between the panes, which creates an airtight seal to keep cold air out and warm air inside. Over time, however, these windows may become damaged or break and require repair. Fortunately, the majority of repairs are simple and can be accomplished without the cost of replacing the entire window.

Warping is a common problem when double-glazed windows are installed. The windows begin to bow, bend, or twist, which can alter the structural integrity of the window as well as its ability to insulate. The best method to avoid this problem is to make sure that your double glazed windows are fitted properly and maintained regularly.

Get in touch with a professional immediately if you notice that your double-glazed windows are sagging. This will help prevent the situation from getting worse. They will be able inspect your windows to determine the reason. They will then use special tools to fix the issue and make sure that your windows are completely sealed.

The most common cause of this issue is the presence of water vapour in the windows which can accumulate over time. This can be caused various factors including the weather, humidity and temperature variations. To remedy this, the specialist will drill a small hole in the window to let out the moisture. The specialist will use an agent for cleaning on the glass to cleanse it, and then apply a sealant.

If your windows can't be closed or opened it could be due to a malfunctioning mechanism or hinges. Before calling a professional to address the issue, it's worthwhile to grease these parts. This can often resolve the issue and reduce your need for replacements. However, if your windows are very old or are not providing the insulation you'd like to see, it is often better to replace them.