UPVC Window Handle Replacement

It is easy to replace a broken window handle with the proper tools. It is essential to know the type of handle you have and the spindle's size before you purchase a replacement.

Older uPVC window handles have a spur which extends and is locked over a wedge striker for cockspur. They can be right or left-handed and have to be matched when replacing.

What type of lock or handle do I have

There are a variety of window handles made of upvc and locks, each with its distinct advantages and functions. The type of handle you choose will determine whether or not your locking mechanism is efficient and if it's easy to open the windows. With time and regular use the handles made of upvc on your windows can be damaged and worn out. This makes them less secure and effective. In some instances, they could even fall off completely. It is important to repair your upvc window handles when you begin to notice them falling off. This will prevent possible break-ins and will keep your home secure.

It's a task that almost anyone can do. You'll need some basic tools, but with appropriate knowledge, it's an easy task that will take only a couple of minutes. You will need to know the kind of handle or lock that you have on your window. This will help you select the appropriate replacement.

Inline Espagnolette Handles

They are usually found on the outside of the window. They are flat in design and feature a latch that engages with the locking mechanism on the frame of the window replacement glass when it is turned. Inline upvc handles come with a spindle that runs through the middle of the handle into the window frame to operate the latch.

Cockspur Handles

They are usually found on older uPVC windows and feature distinct hook-shaped designs. Cockspur handles are secured to the frame of the window by one screw, and are less secure than other varieties of window handles.

Tilt and Turn Handles

Unlike the other handles made of upvc the tilt and turn handles can be turned to open the window and turned inwards to allow to allow ventilation. They have a 7mm spindle on the back and are available both in left and right-handed versions.

It is crucial to determine the spindle's size prior to purchasing a replacement handles made of upvc. Not all of them are the exact same size. To determine the length of your handle made of upvc, simply drop something into the middle of the hole and measure how far down it goes before meeting an obstruction. This is the maximum spindle length that will be suitable for your window.

What is the spindle?

uPVC window handles function in a similar way to doors, by turning the handle to activate an internal latch within the frame. The window can then be opened and closed. However, in some cases, these handles can become damaged, particularly when they are frequently used or exposed to harsh weather conditions. This could mean that you have to replace your uPVC handles on windows since they may not operate the window correctly in the future.

There are many types of uPVC handle options, such as Espag, Cockspur, and Spaded handles. They are made in a variety of ways to fit into uPVC frames. Each handle style uses a different spindle to lock the window mechanism. This is why it is essential to identify the kind of handle you have installed on your uPVC window so you can find the right replacement for it.

You can determine the type of uPVC handle you are using by inspecting the base of the handle. There should be a'snap in cover' over one screw that holds the handle's base in place. Remove this and then you should be able see the second holding screw at the opposite end of the base portion of the handle. After both screws are removed and you are able to pull the handle from the uPVC.

After you have removed the uPVC window handle, you will need to remove the spindle you have removed from the locking mechanism. Take note of the length of the spindle. You'll need to purchase a replacement with the same length as the original handle and the locking device.

The main issue with most window handle problems with uPVC is that the spindle becomes worn out and can no longer work with the locking mechanism. This could be due to damage from constant use or a loosening of the locking mechanism or even corrosion that occurs over time. If this occurs, it is required to replace the window handle and the locking mechanism to restore full functionality to your uPVC windows replacement near me.

How do I get rid of the old handle?

Over time and through everyday usage, window handles could become damaged or broken, and if this happens, it is important to repair them as soon as possible to ensure the safety of your home. It is simple to replace a damaged or worn handle. The task can be completed in under one minute without the need for special tools.

To remove the old handle, first remove the screw located at the base of the handle. Once the screw is removed, the handle can be pulled away from the base section. A second screw is located at the bottom of the handle. This too can be removed. When both screws are removed the handle can be removed from the base section of the window.

After removing the handle and align the fixing holes of the new handle to the holes already present in the window frame. There might be a small cap or sticker on the new handle, so take off these if necessary and then put the handle in place. Once the handle is in place it is essential to check that it is working by turning the handle, and ensuring that the lock mechanism activates.

Espag handles have a spindle that protrudes from the handle and slot into a multipoint locking mechanism within the window frame. Cadenza windows come with a blade with cutouts which fit into the lock mechanism. Cockspur handles are long and hang over the outer frame of the window or the transom bar crossmember.

Once you have the new handle in place, insert the spindle inside the lock inside the window and then tighten it down. Replace the snap-in cover and screw cap (if applicable) once the handle is fixed. The handle is now ready to use, so try opening and closing the window several times to make sure that it works well and securely.

How do I install the new handle?

Switching your uPVC window handle isn't difficult, and the process is quite simple. All you need is a screwdriver and a bit of perseverance. First, ensure that the old handle is unlocked. Remove any screws that are visible. You could also replace them with screw caps. After removing the handle, you'll need to record the length of the spindle that extends from the back. This is crucial because it will determine the type of handle you need to buy.

Espagnolette handles that are made of uPVC are the most sought-after type of handle. They have a spindle that is inserted into the handle and operates a locking mechanism within the frame of the window. The handle opens the latch and allows the window to open. During regular use and over time, handles for espagnolette may become damaged.

Cadenza handles are a kind of uPVC handle that is usually used in tilt and turn windows. They feature an extended blade that works a multipoint locking mechanism within the window. They are more secure than espagnolette handles since they only open from the inside. They can be replaced using the same method as espagnolette handles however you should ensure that the new handle has an angled blade, as opposed to a flat one.

After you have picked the correct handle, simply align the new handle to existing screw holes before screwing it in place. After that, you should put the screw covers back on and verify that the new handle functions correctly. This is done by moving the handle from locked position to the unlocked and then back to the locked position several times. If you encounter any issues, it might be beneficial to speak with a professional to determine if they can assist in resolving the issue. They can advise you on how to fix the issue in a timely and efficient way.